Case Studies

Case Studies

Post date: 09/05/2017
AVT Reliability have installed a number of permanent systems to monitor the long-term integrity of sub-sea 'jacket' structures on offshore oil or gas platforms. Understand how you can globally monitor the condition of entire jacket structures using these extremely powerful and cost effective systems.

Case Studies

Post date: 09/05/2017
AVT Reliability can apply its structural monitoring capabilities to many diverse projects including offshore Mooring Line Integrity Monitoring.

Case Studies

Post date: 02/05/2017
High noise and vibration was found to occur on a compressor oil separator module following the rework of the internal diffuser and addition of a nozzle with blanking flange to allow for inspection.

Case Studies

Post date: 05/04/2017
For this UK food and beverage company, achieving maintenance excellence for assets is at the heart of the company. By working together with AVT Reliability®, they have successfully implemented an integrated condition monitoring into its asset care program.

Case Studies

Post date: 03/10/2016
AVT have been involved in resolving a wide range of pipework vibrations for main lines and small bore connections (SBC) pipework often using the Visco dampers, Fixed Braces and Dynamic Vibration Absorbers (DVA). This has led AVT to design and development of a range of products which are can be more easily adapted and installed on various pipework configurations.

Case Studies

Post date: 03/10/2016
AVT have been involved in resolving a wide range of pipework vibrations for main lines and small bore connections pipework often using the Visco dampers, Fixed Braces and Dynamic Vibration Absorbers (DVA). This has led AVT to design and development of a range of products which are can be more easily adapted and installed on various pipework configurations.

Case Studies

Post date: 23/09/2016
AVT was asked to investigate high vibration of a large electric motor driven pump, which was observed to generate high vibration levels exceeding the alarm level whenever the speed approached 70% of its design running speed.

Case Studies

Post date: 24/08/2016
Following the failure of a Dynamic Vibration Absorber (DVA) on the K3 compressor suction line AVT have designed a suitable replacement DVA that avoids welding on the tuning bar where previous failures have occurred.

Case Studies

Post date: 14/06/2016
AVT Reliability have been providing Condition Based Maintenance support to Dairy Crest Severnside since 2011. This case study demonstrates how collaboration between service providers can benefit their client.

Case Studies

Post date: 07/10/2015
Dairy Crest had recurring water ingress issues with water cooling towers that were resulting in reduced Mean Time Between Failure (MTBF) on the pump motors. Following a decision to commission a lubrication analysis and LabTecta sealing solution from AVT Reliability, they now have more than double machine life expectancy and reduced downtime, and no extra costs.

Share this page

repairs